The full auto hole punching machine use to punch the holes on PVC, PETG and ABS sheets with different thickness and size for contactless cards (RF cards). Control by the servo system and use the precision mould to punch, which ensure the quality of the products and improve the productivity, only need one operator.
In the machine structure, the machine is easy to operate and maintain, which enhances the service life of machine and the productivity.
The appearance and style of the machine is concise and easy, rationalization and hommization, and the user-friendly operator interface protect the safety of operators. We can also design the different style appearance according to different requirements.
We offer the perfect after-sale service and technical follow-up, and provide paid lifelong maintenance.
1. Punch the hole for chip of the inlay, which ensure the modules and the PVC embedding at the same plane and protect the chips.
2. The machine have two moulds with two different sides, it can be used for different production technology, just press the switch to select the mould.
3. The pitch and the size of the punching mould can be adjusted according to the requirement.
4. The cylinder drives punching mould up and down with the low noise.
5. PLC control and can be punched different layout,
6. Use the precision mould to punch and ensure the quality of the products.
7. The life time of the mould is: It only need to be whetted every two million times punching
8. Materials are loaded using the dowel pin, easy to adjust
9. Use the servo system to position which ensure the position accurate
10.Use the Delta PLC and the touch screen, stable and visualized.
Control system: Mitsubishi PLC
Servo system: Taiwan DELTA
Zero-dedect induction switch: SUNX
Screw: Taiwan HIWIN
Slider: Taiwan HIWIN
Power supply: Taiwan MeanWell
Air cylinder: SMC
Solenoid valve: SMC
Punching mould: Made by YMJ
Weight: Approx. 600kg
Power supply: AC220V 50/60HZ 5A
Control: Servo positioning + PLC
Tolerance of hole size: ±0.05mm
Accuracy of punching: ±0.05mm
Tolerance of center distance between two hole is : ±0.05mm
Tolerance of burr: ≤0.08mm
Applicable materials: 0.1~0.3mm thickness of PVC, PETG and ABS sheet, 0.1mm PC sheet
Operator: 1 person
Output rate: About 6000pcs/hr
The life time of the mould is: It can be punched three million times before regrind.
Air pressure: 6 kg /c㎡
Air consumption: 700L/min
Product percent of pass: 99.8%
Add：Building B, Hongxing Xifang Industrial Park,Datianyang,
Songyu Road, Songgang Street,Bao'An District,
Shenzhen, 518105, China
All Rights Reserved © 2019 深圳源明杰科技股份有限公司 粤ICP备 088****88 Design by:35.com